Nickel mimọ 200 / Uns No2200 Waya 0.25mm
Nickel mimọ 200 / Uns No2200 Waya 0.25mm
Ipele: Ni200,Ni201,N4,N6
Ga ductility
O tayọ ipata resistance
ti o dara darí agbara
Alloy Apejuwe
Nickel 200/201 jẹ ipele ti a lo pupọ julọ, ni gbogbogbo pato fun awọn fila transistor, awọn anodes fun awọn tubes itanna, awọn itọsọna ti awọn paati itanna / Asiwaju-ni-Wires fun awọn atupa ati fun Wire-Mesh. Tun lo ni fọọmu rinhoho fun ọpọlọpọ awọn ohun elo pẹlu awọn batiri Ni-Cd.
Ipo ti Ipese
Nickel 200, 201 ati 205 ni a pese ni awọn ipo wọnyi:
Tutu Fa, Special Ibinu.
Tutu Fa, Annealed. Gígùn ati Ge Gigun.
Akiyesi:
NUS N02201 (ASTM B 162) kanna bi N4 (GB/T 2054).
NUS N02200 (ASTM B 162) kanna bi N6 (GB/T 2054).
Awọn fọọmu
Coil - rinhoho, bankanje, Ribbon
Waya - Profaili, Yika, Alapin, Square
ọpá, igi, forgings, awo, dì
Kemikali tiwqn
| Ipele | Ni+Co | Cu | Si | Mn | C | Mg | S | P | Fe |
| N4 | 99.9 | 0.015 | 0.03 | 0.002 | 0.01 | 0.01 | 0.001 | 0.001 | 0.04 |
| N6 | 99.6 | 0.10 | 0.10 | 0.05 | 0.10 | 0.10 | 0.005 | 0.002 | 0.10 |
| Ni201 | 99.0 | ≤0.25 | ≤0.35 | ≤0.35 | ≤0.02 | / | ≤0.01 | / | ≤0.40 |
| Ni200 | 99.0 | 0.20 | 0.30 | 0.30 | 0.15 | / | 0.01 | / | 0.40 |
Nickel bankanje Awọn agbara
| Ipele | Rinkiri Nickel mimọ 99.6% / 99.9% |
| Sisanra | 0,002 to 2,50 mm |
| Awọn ifarada | +/- 5% (awọn ifarada pataki wa) |
| Ìbú | Titi di 350mm jakejado |
| Iwọn okun | Up to 80 kg lai welds |
| Awọn sakani ibinu | Annealed si kikun Lile |
Nickel bankanje ọja konge
| Sisanra | Sisanra iyọọda | Burr iga | Iwọn iwọn ati ifarada | |||||
| 2≤w<10 | 10≤w<50 | 50≤w<100 | 100≤w<150 | 150≤w<200 | 200≤w | |||
| 0.02≤t <0.05 | ± 0.003 | ≤0.005 | ± 0.05 | ±0.10 | ±0.15 | ±0.20 | ±0.30 | ± 0.50 |
| 0.05≤t<0.1 | ± 0.005 | ≤0.01 | ||||||
| 0.1≤t<0.2 | ± 0.008 | ≤0.015 | ||||||
| 0.2≤t <0.3 | ± 0.012 | ≤0.02 | ||||||
| 0.3≤t <0.4 | ± 0.015 | ≤0.03 | ± 0.10 | ± 015 | ±0.25 | ± 0.50 | ± 0.80 | ± 1.00 |
| 0.4≤t<0.6 | ± 0.025 | ≤0.05 | ||||||
| 0.6≤t<0.8 | ±0.030 | ≤0.06 | ± 0.30 | ±0.40 | ± 0.50 | ± 0.50 | ± 0.80 | ± 1.00 |
| 0.8≤t<1.0 | ±0.040 | |||||||
| 1.0≤t<1.2 | ± 0.050 | ≤0.08 | ± 0.50 | ± 0.50 | ± 0.80 | ± 1.00 | ± 1.00 | ± 1.50 |
| 1.2≤t<1.4 | ±0.060 | |||||||
| 1.4≤t<1.7 | ± 0.070 | ≤0.10 | ||||||
| 1.7≤t<2.0 | ± 0.080 | |||||||
