Constantan CuNi44Mn1 Ejò nickel Waya 0.6mm fun alapapo onirin
Ọja finifini ifihan
Constantan Konstantan CuNi44Mn1 Ejò nickel waya 0.6mm fun alapapo onirin.
Tankii Alloys jẹ Ejò - nickel alloy (CuNi44Mn1 alloy) ti a ṣe afihan nipasẹ agbara itanna giga, ductility giga ati idaabobo ipata to dara. O dara fun lilo ni awọn iwọn otutu to 400 ° C. Aṣoju awọn ohun elo fun Tankii Alloys ni o wa otutu – idurosinsin potentiometers, ise rheostats ati ina motor Starter resistances.
Apapo ti aifiyesi iwọn otutu olùsọdipúpọ ati ki o ga resistivity jẹ ki awọn alloy paapa dara fun awọn yikaka ti konge resistors.
Alloys ti wa ni ti ṣelọpọ lati electrolytic Ejò ati funfun nickel nipasẹ Tankii Co.Ltd, awọn alloy ti wa ni pataki ati ki o wa ni ọpọlọpọ awọn titobi waya.
Akopọ deede%
| Eroja | Akoonu |
|---|---|
| Nickel | 45 |
| Manganese | 1 |
| Ejò | Bal. |
Awọn ohun-ini Mekaniki Aṣoju (1.0mm)
| Ohun ini | Iye |
|---|---|
| Agbara ikore (Mpa) | 250 |
| Agbara Fifẹ (Mpa) | 420 |
| Ilọsiwaju (%) | 25 |
Awọn ohun-ini Aṣoju ti ara
| Ohun ini | Iye |
|---|---|
| Ìwúwo (g/cm3) | 8.9 |
| Agbara itanna ni 20℃ (Ωmm²/m) | 0.49 |
| Ipin iwọn otutu ti resistivity (20℃ ~ 600℃) X10⁻⁵/℃ | -6 |
| olùsọdipúpọ̀ iṣẹ́ ní 20℃ (WmK) | 23 |
| EMF vs Cu(μV/℃)(0~100℃) | -43 |
olùsọdipúpọ ti gbona imugboroosi
| Iwọn otutu | Imugboroosi Gbona x10⁻⁶/K |
|---|---|
| 20 ℃ - 400 ℃ | 15 |
Specific agbara ooru
| Iwọn otutu | Iye (J/gK) |
|---|---|
| 20℃ | 0.41 |
Oju ipa (℃)|1280|
|Iwọn otutu ti n ṣiṣẹ lemọlemọfún ni afẹfẹ (℃)|400|
|Awọn ohun-ini oofa|ti kii ṣe – oofa|
Alloys - Ṣiṣẹ Ayika Performance
| Alloy Name | Ṣiṣẹ Ni oju-aye ni 20 ℃ | Ṣiṣẹ ni iwọn otutu ti o pọju 200 ℃ (Afẹfẹ ati atẹgun ni awọn gaasi ninu) | Ṣiṣẹ ni iwọn otutu ti o pọju 200 ℃ (awọn gaasi pẹlu Nitrogen) | Ṣiṣẹ ni iwọn otutu ti o pọju 200 ℃ (awọn gaasi pẹlu imi-ọjọ - oxidability) | Ṣiṣẹ ni iwọn otutu ti o pọju 200 ℃ (awọn gaasi pẹlu imi-ọjọ - idinku) | Ṣiṣẹ ni iwọn otutu ti o pọju 200 ℃ (carburization) |
|---|---|---|---|---|---|---|
| Tankii Alloys | dara | dara | dara | dara | buburu | dara |
Ara ti Ipese
| Alloys Name | Iru | Iwọn |
|---|---|---|
| Tankii Alloys-W | Waya | D = 0.02mm ~ 1mm |
| Tankii Alloys-R | Ribbon | W = 0.4 ~ 40, T = 0.03 ~ 2.9mm |
| Tankii Alloys-S | Sisọ | W = 8 ~ 200mm, T = 0.1 ~ 3.0 |
| Tankii Alloys-F | Fọọmu | W = 6 ~ 120mm, T = 0.003 ~ 0.1 |
| Tankii Alloys-B | Pẹpẹ | Dia = 8 ~ 100mm, L = 50 ~ 1000 |
